Superwave Laser Technology Co.,Ltd
Call us:+86-139 2523 7065
[[TD-Hot Products]]
Home > Exhibition > Content

Comparative analysis of laser cutting machine with high anti-aluminum plate.

Superwave Laser Technology Co.,Ltd | Updated: May 06, 2018

The comparison of aluminum laser cutting machine is considered from three points: cutting quality, cutting speed and production cost (i.e. service life cost).

1. Cutting quality
Aluminum profiles are highly reflective materials, so neither fiber laser cutting machines nor YAG laser cutting machines can process thicker aluminum. In addition, the aluminum material is not resistant to high temperature. It is easy to have burrs in the process of cutting aluminum. Therefore, it is necessary to focus on the control process and get the ideal cutting quality.
2. Cutting speed
Cutting speed is also need to be controlled, too fast cutting speed is easy to produce burr, cutting speed too slow will make crack of aluminum materials, influence the cutting quality, therefore need to process control. In general, the cutting speed of laser cutting machine with equivalent power is higher than that of YAG laser cutting machine.
3. Production cost
The processing cost of laser cutting machine is very low, much lower than other cutting technology. Fiber laser cutting machine and YAG laser cutting machine as a comparison, optical fiber laser cutting cost is lower than the YAG laser cutting machine, the latter often need to change laser light fittings, but from a long-term point of view, the aluminum material for optical fiber laser cutting machine laser damage is serious, greatly reduce the service life of laser, this this point to see YAG is lower than the cost of the optical fiber laser cutting machine.
From the above three analysis, you can see on the cutting of aluminum, the two types of laser cutting machine all have their own advantages and disadvantages, customers can choose according to their own conditions and demand of the machine.